-
SRD 4,227.50
SRD 8,455.00MAKITA A-94530-10 TCT SAW BLADE 7-1/4″T (10P)
SRD 4,227.50SRD 8,455.00 -
MAKITA MDP60 10MM DRILL-SSP
- Lightweight perfect for one handed operation
- Perfect for drilling and screw driving into metal or timber
- Comfortable grip and exceptional balance
- Reversible
- Variable speed
- Keyless chuck
SRD 1,080.00SRD 2,700.00MAKITA MDP60 10MM DRILL-SSP
SRD 1,080.00SRD 2,700.00 -
LIFETIME 2940 4FT FOLDING TABLE
- Convenient lightweight design for indoor/outdoor use
- Designed with Style & durability
SRD 2,409.09LIFETIME 2940 4FT FOLDING TABLE
SRD 2,409.09 -
MAKITA M0600G MT 10 MM DRILL
- High performance and durability at a low cost.
- Variable speed trigger allows operator to adjust speed based on material or application.
- Powerful 350 W motor for continuous use.
- Positive-grip in-line design maximizes thrust.
- Compact and lightweight for reduced operator fatigue.
SRD 960.00SRD 2,400.00MAKITA M0600G MT 10 MM DRILL
SRD 960.00SRD 2,400.00 -
MAKITA KP0800-240 POWER PLANER
- Right Chip Ejection
- Parallel Fence
- Lock-Off Switch
- Dust Extraction Facility
- Fan-Cooled Motor
- Replaceable Carbon Brushes
- Soft-Grip Handle
SRD 4,840.00SRD 12,100.00MAKITA KP0800-240 POWER PLANER
SRD 4,840.00SRD 12,100.00 -
MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
- Automatic engine decompression valve is engineered
into the cam gear to reduce pull start force by 40% - Five-stage, foam-paper-nylon filtration system with
advance direction air flow to provide cleaner air for better
engine durability - Integrated wheels reduce fatigue during long straight cuts
and retract when not in use to prevent unexpected
movement - Clear primer bulb facilitates fuel delivery to the carburetor
for easier cold starts - Pressure compensated carburetor with vented choke
plate is engineered to reduce flooding by automatically
adjusting to deliver the proper amount of fuel - Advanced oil separation & lubrication system to improve
valve train durability and engine life - Specially treated rods, followers and valves minimize wear
and extend engine life - Single lever On-Off-Choke operation switch for operator
convenience - Shielded exhaust outlet and larger spark arrestor screen
prevents contaminates from restricting air flow - External fuel tank vent eliminates pressure build up
- Sealed cartridge recoil starter rope reduces wear by
keeping out dust and debris - Cutting arm easily changes from center position to flush
(outboard) position allowing cuts directly adjacent to curb
edges, wall or directly above the ground - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort
SRD 38,200.00SRD 95,500.00MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
SRD 38,200.00SRD 95,500.00 - Automatic engine decompression valve is engineered
-
MAKITA EK7301 14″73CC POWER CUTTER
- Five-stage, foam-paper-nylon system with advance
directional air flow provides cleaner air for better saw
performance - Improved ignition system with larger flywheel and rare
earth magnets create more efficient power - Cutting arm position changes simply from center position
to flush (outboard) position allowing cuts directly
adjacent to curb edges, wall or directly above the ground - On-Off-Choke operation switch on a single lever for
operator convenience - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort - Microchip-controlled carburetor designed to compensate
engine timing according to work load - Aluminum guard and wheel pressure plates to reduce weight
- Starter grip decompression valve for faster starting
SRD 33,560.00SRD 83,900.00MAKITA EK7301 14″73CC POWER CUTTER
SRD 33,560.00SRD 83,900.00 - Five-stage, foam-paper-nylon system with advance
-
SRD 18,059.80
SRD 45,149.50MAKITA TW1000 1″ IMPACT WRENCH W/FRICTION RING ANVIL
SRD 18,059.80SRD 45,149.50 -
Channellock 1/2 In. Drive 24 mm 6-Point Deep Metric Impact Socket
6-point sockets offer more surface area making them less likely to slip off or round over corners. Chrome molybdenum steel with black oxide finish. Lifetime warranty.
SRD 324.50SRD 590.00Channellock 1/2 In. Drive 24 mm 6-Point Deep Metric Impact Socket
SRD 324.50SRD 590.00 -
CHANNELLOCK 302965 UNIVERSAL SOCKET SET (20-PIECE) 3/8 INCH CHROME VANADIUM STEEL
Versatile socket set designed for both standard and metric fasteners. It includes a range of sockets from 1/4″ to 3/4″ (SAE) and 9 mm to 19 mm (Metric), along with a 3/8″ drive ratchet handle and a 6″ extension. Made from chrome vanadium steel and textured bands for improved grip.
SRD 2,197.25SRD 3,995.00CHANNELLOCK 302965 UNIVERSAL SOCKET SET (20-PIECE) 3/8 INCH CHROME VANADIUM STEEL
SRD 2,197.25SRD 3,995.00 -
Channellock 28-in-1 Universal Ratcheting Box Wrench Set (2-Piece)
This 2-Piece 28-in-1 universal ratcheting box end wrench set is made from chrome vanadium steel and designed for heavy duty applications. Each wrench fits more than 28 sizes. 63 total sizes including: 5/16 In., 3/8 In., 7/16 In., 1/2 In., 9/16 In., 5/8 In., 11/16 In., 3/4 In. 6-point and 12-point; 8mm, 10mm, 11mm, 13mm, 14mm, 16mm, 17mm, 19mm 6-Point, 12-Point and Spline; E10, E12, E14, E16, E18, E20, E22, E24 Star; 9/32 In., 11/32 In., 3/8 In., 7/16 In., 15/32 In., 17/32 In., 9/16 In., 5/8 In. Square; 7mm, 9mm, 11mm, 12mm, 13mm, 14mm, 16mm Square.
SRD 1,784.75SRD 3,245.00Channellock 28-in-1 Universal Ratcheting Box Wrench Set (2-Piece)
SRD 1,784.75SRD 3,245.00 -
Channellock Products 1/2″ Drive 72-Tooth Ratchet
- Quick release ratchet with 72 teeth, 5 deg (degree) swing for better performance in tight spaces.
- Textured band for greater gripping power.
- Chrome vanadium steel.
- Meets or exceeds ANSI (American National Standards Institute) specifications.
- Lifetime warranty.
SRD 1,446.50SRD 2,630.00Channellock Products 1/2″ Drive 72-Tooth Ratchet
SRD 1,446.50SRD 2,630.00
Product categorie
