-
MAKITA 763191-5 KEYLESS DRILL CHUCK
The Makita 1/2″ Keyless Chuck is engineered to work with both driver-drills and hammer drills. The keyless design makes bit changes fast and easy. Each chuck is manufactured of high quality materials for long life and added durability.
SRD 125.00MAKITA 763191-5 KEYLESS DRILL CHUCK
SRD 125.00 -
MAKITA 194986-9 CARBON BRUSH CB-154
A carbon brush is a component used to conduct electrical current between the stationary and rotating parts of a motor
SRD 65.00MAKITA 194986-9 CARBON BRUSH CB-154
SRD 65.00 -
MAKITA T-00745 2 CYCLE ENGINE OIL-(1-INDIVIDU)
Makita is a leader in 2-cycle outdoor power equipment, and Makita Synthetic 2-Cycle Fuel Mix is ideal for use with low emission 2-cycle engines such as Makita Power Cutters and Chain Saws. It includes fuel stabilizer for improved performance. It is formulated for high heat resistance, which is ideal for low-emission 2-cycle engines.
SRD 87.50SRD 175.00MAKITA T-00745 2 CYCLE ENGINE OIL-(1-INDIVIDU)
SRD 87.50SRD 175.00 -
MAKITA D-55326 WIRE BRUSH KNOT CUP 4″
Thick, Knotted CUP design is ideal for heavy-duty, aggressive surface conditioning on expansive surface areas while Thick, Knotted WHEEL design is best for restricted surface areas, small spaces and borders like pipes | Thinner, Crimped CUP design delivers maximal flexibility and fatigue resistance while also minimizing scratch risk in expansive metal surface areas
SRD 390.00MAKITA D-55326 WIRE BRUSH KNOT CUP 4″
SRD 390.00 -
MAKITA D-45989 7-1/4″X5/8 24T CARBIDE BLADE
The Makita® 7-1/4″ Framing Blade (D-45989) is ideal for use in most general construction cutting applications. It quickly cuts through rough framing lumber, plywood, OSB, and engineered lumber. The ATAF (Alternate Top Alternate Face) tooth design and expertly tensioned plate make for precise cuts. Ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss.
SRD 45.00SRD 90.00MAKITA D-45989 7-1/4″X5/8 24T CARBIDE BLADE
SRD 45.00SRD 90.00 -
MAKITA D-45652 NYLON WHEEL BRUSH 100MM/4″
- Suitable for removing rust and deburring particular areas
- Fine Grit (240#) is suitable for finishing surfaces
SRD 235.00SRD 470.00MAKITA D-45652 NYLON WHEEL BRUSH 100MM/4″
SRD 235.00SRD 470.00 -
MAKITA D-44373 4″ DIAMOND BLADE SEGMENTED CONCRETE
- This range of blades provide a high quality cutting performance especially in harder materials as the weld assists the blade to cope with the higher temperatures during the cutting action.
- Materials – Hard Concrete / Granite / Clay Brick / Concrete / Besser Block / Pavers / Cement / Roof Tile
SRD 370.00SRD 740.00MAKITA D-44373 4″ DIAMOND BLADE SEGMENTED CONCRETE
SRD 370.00SRD 740.00 -
MAKITA D-44292 MAKITA 9″ DIAMOND BLADE SEGMENTED CONCRETE
- This range of blades have been designed and manufactured to provide cost effective cutting in popular building materials.
- Materials – Concrete / Besser Block / Pavers / Cement / Roof Tile
SRD 262.50SRD 525.00MAKITA D-44292 MAKITA 9″ DIAMOND BLADE SEGMENTED CONCRETE
SRD 262.50SRD 525.00 -
MAKITA D-41414 DIAMOND WHEEL DRY CUT
- Diamond Wheel Cutting for Metal
- For use with Cut Off Machine 14″
SRD 2,050.00SRD 4,100.00MAKITA D-41414 DIAMOND WHEEL DRY CUT
SRD 2,050.00SRD 4,100.00 -
MAKITA D-30025 2-1/4 SELF FEED BIT
Makita Self Feed Bit is designed for drilling holes through wood for pipe and conduit installation. Thethredaded screw point provides the self feed action and the outlining spurs create the diameter of the hole. The bit features a shank with three flats for reduced slippage under load.
SRD 1,500.00MAKITA D-30025 2-1/4 SELF FEED BIT
SRD 1,500.00 -
SRD 335.00
SRD 670.00MAKITA D-29935 1″ SELF FEED BIT
SRD 335.00SRD 670.00 -
MAKITA D-24022 1-1/4″X6″ FLAT BIT HEX
- Chisel edge for heavy-duty, fast drilling
- For Rapid Boring Applications in Wood
- Brad point tip ensures precise and accurate holes
- Not for use in Drill Presses
SRD 67.50SRD 135.00MAKITA D-24022 1-1/4″X6″ FLAT BIT HEX
SRD 67.50SRD 135.00
Product categorie
