-
MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
- Automatic engine decompression valve is engineered
into the cam gear to reduce pull start force by 40% - Five-stage, foam-paper-nylon filtration system with
advance direction air flow to provide cleaner air for better
engine durability - Integrated wheels reduce fatigue during long straight cuts
and retract when not in use to prevent unexpected
movement - Clear primer bulb facilitates fuel delivery to the carburetor
for easier cold starts - Pressure compensated carburetor with vented choke
plate is engineered to reduce flooding by automatically
adjusting to deliver the proper amount of fuel - Advanced oil separation & lubrication system to improve
valve train durability and engine life - Specially treated rods, followers and valves minimize wear
and extend engine life - Single lever On-Off-Choke operation switch for operator
convenience - Shielded exhaust outlet and larger spark arrestor screen
prevents contaminates from restricting air flow - External fuel tank vent eliminates pressure build up
- Sealed cartridge recoil starter rope reduces wear by
keeping out dust and debris - Cutting arm easily changes from center position to flush
(outboard) position allowing cuts directly adjacent to curb
edges, wall or directly above the ground - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort
SRD 38,200.00SRD 95,500.00MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
SRD 38,200.00SRD 95,500.00 - Automatic engine decompression valve is engineered
-
MAKITA HM1810 BREAKER HAMMER
- Power : 15 AMP motor to tackle demanding jobs
- Comfort : Makita’s exclusive AVT® counterbalance system reduces vibration
- Durability : Automatic brush cut-out system for longer tool life
- Convenience : 16.4 ft. long power cord for easy maneuverability
- Includes : Hex wrench
SRD 35,550.68SRD 88,876.70MAKITA HM1810 BREAKER HAMMER
SRD 35,550.68SRD 88,876.70 -
MAKITA EK7301 14″73CC POWER CUTTER
- Five-stage, foam-paper-nylon system with advance
directional air flow provides cleaner air for better saw
performance - Improved ignition system with larger flywheel and rare
earth magnets create more efficient power - Cutting arm position changes simply from center position
to flush (outboard) position allowing cuts directly
adjacent to curb edges, wall or directly above the ground - On-Off-Choke operation switch on a single lever for
operator convenience - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort - Microchip-controlled carburetor designed to compensate
engine timing according to work load - Aluminum guard and wheel pressure plates to reduce weight
- Starter grip decompression valve for faster starting
SRD 33,560.00SRD 83,900.00MAKITA EK7301 14″73CC POWER CUTTER
SRD 33,560.00SRD 83,900.00 - Five-stage, foam-paper-nylon system with advance
-
MAKITA HM1213C DEMOLITION HAMMER;SDS-MAX
- Comfort : Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration
- Durability : L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
- Applications : Variable speed control dial enables user to match the speed to the application
- Accuracy : Soft start suppresses start-up reaction for more precision and better accuracy
- Includes : Bull point, bit grease and case
SRD 30,040.00SRD 75,100.00MAKITA HM1213C DEMOLITION HAMMER;SDS-MAX
SRD 30,040.00SRD 75,100.00 -
MAKITA HM1101C DEMOLITION HAMMER;SDS-MAX
- Soft start feature.
- Constant speed under load
- One-touch sliding chuck for easy bit changes.
- Double Insulation
- Includes carry case
SRD 25,920.00SRD 64,800.00MAKITA HM1101C DEMOLITION HAMMER;SDS-MAX
SRD 25,920.00SRD 64,800.00 -
DEWALT DWS715 12-INCH MITER SAW, 15-AMP, SINGLE BEVEL, COMPOUND
The DW715 12-inch single bevel miter saw is powered by a 15 amp motor to drive 4,000 rpm for increased power and durability. Features stainless steel miter lock plate and cam miter lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding gates support 5-1/2 in.
SRD 22,000.00 -
SRD 18,059.80
SRD 45,149.50MAKITA TW1000 1″ IMPACT WRENCH W/FRICTION RING ANVIL
SRD 18,059.80SRD 45,149.50 -
797669 T-1A 12″ FBGL STEPLADDER
Extra heavy-duty professional use step ladder. Features double riveted slip-resistant 3 In. Traction-Tred steps, paint can hanger, internal Pinch-Proof spreaders, knee braced steps and rear horizontals, full set of rear horizontals spaced 1 per foot. Sturdy plastic Tool-Tra-Top for tools/paint can, and slots for Lock-In paint utility bucket or Lock-In paint cup. Back up plates reinforce all top connectors. Every rivet is backed up by metal part or washer to protect rails. Orange side rails.
SRD 11,995.00797669 T-1A 12″ FBGL STEPLADDER
SRD 11,995.00 -
789755 T-1A 10″ BGL STEPLADDER
Extra heavy-duty professional use step ladder. Features double riveted slip-resistant 3 In. Traction-Tred steps, paint can hanger, internal Pinch-Proof spreaders, knee braced steps and rear horizontals, full set of rear horizontals spaced 1 per foot. Sturdy plastic Tool-Tra-Top for tools/paint can, and slots for Lock-In paint utility bucket or Lock-In paint cup. Back up plates reinforce all top connectors. Every rivet is backed up by metal part or washer to protect rails. Orange side rails
SRD 9,995.00789755 T-1A 10″ BGL STEPLADDER
SRD 9,995.00 -
MAKITA BO6030 RANDOM ORBIT SANDER6″ (150MM)
- Variable speed control dial (4,000-10,000 OPM) enables user to match the sanding speed to the application
- Efficient through-the-pad dust collection system with dust bag for a cleaner work environment
- Ergonomic rubberized rear handle reduces vibration for operator comfort
- 1/8″ orbit diameter provides a swirl-free finish
- Utilizes 6″ hook-and-loop abrasive discs for fast and easy installation
SRD 9,000.00SRD 22,500.00MAKITA BO6030 RANDOM ORBIT SANDER6″ (150MM)
SRD 9,000.00SRD 22,500.00 -
DEWALT 15 AMP 7-1/4 IN. CIRCULAR SAW
Dewalt 15 Amp 7-1/4 in. Circular Saw
- 9.8 lb. Lightweight tool designed to reduce user fatigue and increase productivity.
- 15 Amp motor, 2,200 MWO powerful enough for the toughest applications.
- 50-degree bevel capacity with a 45-degree stop allows for aggressive bevel cuts while enabling the user to quickly locate the common angle.
- Aluminum base designed for added stability.
- Lower guard design enhances performance when making bevel cuts and cutting plates.
SRD 8,800.00DEWALT 15 AMP 7-1/4 IN. CIRCULAR SAW
SRD 8,800.00 -
DEWALT DW756 BENCH GRINDER, 6-INCH
The heavy-duty DEWALT DW756 6-inch grinder is ideal for all grinding operations, including grinding tools, deburring, rust removal, molding and object cleaning. It is powered by a 5/8 hp induction motor that spins at 3,450 rpm for easy and reliable high-speed material removal.
6-inch bench sander with 5/8 hp motor
The DW756 is complemented by an industrial cast iron base and motor housing for added durability and extended life. It has 12-1/2-inch spacing between wheels for longer and larger grinding applications, and precision-machined adjustable aluminum tool rests allow the user to precisely position the work.
Rear exhaust ports in the wheel arches provide smooth operation. This reel is 15 inches tall and weighs 28-1/2 pounds.
SRD 8,200.00DEWALT DW756 BENCH GRINDER, 6-INCH
SRD 8,200.00
Product categorie
