No products in the cart.
-
MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
- Automatic engine decompression valve is engineered
into the cam gear to reduce pull start force by 40% - Five-stage, foam-paper-nylon filtration system with
advance direction air flow to provide cleaner air for better
engine durability - Integrated wheels reduce fatigue during long straight cuts
and retract when not in use to prevent unexpected
movement - Clear primer bulb facilitates fuel delivery to the carburetor
for easier cold starts - Pressure compensated carburetor with vented choke
plate is engineered to reduce flooding by automatically
adjusting to deliver the proper amount of fuel - Advanced oil separation & lubrication system to improve
valve train durability and engine life - Specially treated rods, followers and valves minimize wear
and extend engine life - Single lever On-Off-Choke operation switch for operator
convenience - Shielded exhaust outlet and larger spark arrestor screen
prevents contaminates from restricting air flow - External fuel tank vent eliminates pressure build up
- Sealed cartridge recoil starter rope reduces wear by
keeping out dust and debris - Cutting arm easily changes from center position to flush
(outboard) position allowing cuts directly adjacent to curb
edges, wall or directly above the ground - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort
SRD 42,020.00SRD 95,500.00MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
SRD 42,020.00SRD 95,500.00 - Automatic engine decompression valve is engineered
-
MAKITA HM1810 BREAKER HAMMER
- Power : 15 AMP motor to tackle demanding jobs
- Comfort : Makita’s exclusive AVT® counterbalance system reduces vibration
- Durability : Automatic brush cut-out system for longer tool life
- Convenience : 16.4 ft. long power cord for easy maneuverability
- Includes : Hex wrench
SRD 39,105.75SRD 88,876.70MAKITA HM1810 BREAKER HAMMER
SRD 39,105.75SRD 88,876.70 -
MAKITA EK7301 14″73CC POWER CUTTER
- Five-stage, foam-paper-nylon system with advance
directional air flow provides cleaner air for better saw
performance - Improved ignition system with larger flywheel and rare
earth magnets create more efficient power - Cutting arm position changes simply from center position
to flush (outboard) position allowing cuts directly
adjacent to curb edges, wall or directly above the ground - On-Off-Choke operation switch on a single lever for
operator convenience - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort - Microchip-controlled carburetor designed to compensate
engine timing according to work load - Aluminum guard and wheel pressure plates to reduce weight
- Starter grip decompression valve for faster starting
SRD 36,916.00SRD 83,900.00MAKITA EK7301 14″73CC POWER CUTTER
SRD 36,916.00SRD 83,900.00 - Five-stage, foam-paper-nylon system with advance
-
MAKITA HM1213C DEMOLITION HAMMER;SDS-MAX
- Comfort : Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration
- Durability : L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
- Applications : Variable speed control dial enables user to match the speed to the application
- Accuracy : Soft start suppresses start-up reaction for more precision and better accuracy
- Includes : Bull point, bit grease and case
SRD 33,044.00SRD 75,100.00MAKITA HM1213C DEMOLITION HAMMER;SDS-MAX
SRD 33,044.00SRD 75,100.00 -
MAKITA HM1101C DEMOLITION HAMMER;SDS-MAX
- Soft start feature.
- Constant speed under load
- One-touch sliding chuck for easy bit changes.
- Double Insulation
- Includes carry case
SRD 28,512.00SRD 64,800.00MAKITA HM1101C DEMOLITION HAMMER;SDS-MAX
SRD 28,512.00SRD 64,800.00 -
MAKITA HR5212C ROTARY HAMMER 2″ 52MM SDS-MAX
- Has over 45% less vibration than the previous model.
- It is designed with improving anti-vibration technology. (AVT)
- A synchronized three-component system for significantly less vibration.
SRD 20,945.10SRD 47,602.50MAKITA HR5212C ROTARY HAMMER 2″ 52MM SDS-MAX
SRD 20,945.10SRD 47,602.50 -
SRD 19,865.78
SRD 45,149.50MAKITA TW1000 1″ IMPACT WRENCH W/FRICTION RING ANVIL
SRD 19,865.78SRD 45,149.50 -
SRD 19,401.62
SRD 44,094.60MAKITA HR4013C ROTARY HAMMER 1-9/16″(40MM)
SRD 19,401.62SRD 44,094.60 -
MAKITA 1100 POWER PLANER 82MM
This powerful 750W planer is designed for precision and efficiency in woodworking projects. It features a planing width of 82 mm (3-1/4″), allowing for broad coverage in each pass, while the planing depth of 3 mm (1/8″) provides the flexibility to remove substantial material or perform fine adjustments.
SRD 15,356.00SRD 34,900.00MAKITA 1100 POWER PLANER 82MM
SRD 15,356.00SRD 34,900.00 -
MAKITA 1805N POWER PLANER 155MM
- Rugged aluminium housing and easy depth settings.
- Planes up to 155mm (6-1/8″) wide and 2mm (1/16″) deep in a single pass.
- Precision machined aluminium base for planing accuracy.
Item Includes- Sharpening Holder Assembly, Blade Gauge Assembly, Socket Wrench, Planer Blades 2.
SRD 12,750.98SRD 28,979.50MAKITA 1805N POWER PLANER 155MM
SRD 12,750.98SRD 28,979.50 -
MAKITA HR2810 COMBINATION HAMMER 1-1/8′(28MM);SDS-PLUS
- 3 operation modes: hammering, hammering with rotation, rotation
- Highest-in-class efficiency in both drilling and chipping
- Compact L-shaped motor housing
- One-touch sliding chuck for easy bit change.
- Ergonomically designed handle with rubberized soft grip provides more control and comfort
- Double insulation for extra durability
- Has variable speed
- Reversing combination hammer drill
- Adapted for SDS plus bits
- With torque limiter
- With dust collecting feature
SRD 11,572.00SRD 26,300.00MAKITA HR2810 COMBINATION HAMMER 1-1/8′(28MM);SDS-PLUS
SRD 11,572.00SRD 26,300.00 -
MAKITA 191383-0 SHEAR BLADE SET JS 1600
- Convenience : install quickly and easily
- Durability : durable metal construction for long life
- Capacity : cuts 18 gauge mild steel and 16 gauge stainless steel
- Performance : for use with MAKITA 16 gauge shear models js1600, js1602
- Includes : set of 2 blades; 8 cutting edges per blade
SRD 10,912.00SRD 24,800.00MAKITA 191383-0 SHEAR BLADE SET JS 1600
SRD 10,912.00SRD 24,800.00
