No products in the cart.
-
MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
- Automatic engine decompression valve is engineered
into the cam gear to reduce pull start force by 40% - Five-stage, foam-paper-nylon filtration system with
advance direction air flow to provide cleaner air for better
engine durability - Integrated wheels reduce fatigue during long straight cuts
and retract when not in use to prevent unexpected
movement - Clear primer bulb facilitates fuel delivery to the carburetor
for easier cold starts - Pressure compensated carburetor with vented choke
plate is engineered to reduce flooding by automatically
adjusting to deliver the proper amount of fuel - Advanced oil separation & lubrication system to improve
valve train durability and engine life - Specially treated rods, followers and valves minimize wear
and extend engine life - Single lever On-Off-Choke operation switch for operator
convenience - Shielded exhaust outlet and larger spark arrestor screen
prevents contaminates from restricting air flow - External fuel tank vent eliminates pressure build up
- Sealed cartridge recoil starter rope reduces wear by
keeping out dust and debris - Cutting arm easily changes from center position to flush
(outboard) position allowing cuts directly adjacent to curb
edges, wall or directly above the ground - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort
SRD 42,020.00SRD 95,500.00MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
SRD 42,020.00SRD 95,500.00 - Automatic engine decompression valve is engineered
-
MAKITA HM1810 BREAKER HAMMER
- Power : 15 AMP motor to tackle demanding jobs
- Comfort : Makita’s exclusive AVT® counterbalance system reduces vibration
- Durability : Automatic brush cut-out system for longer tool life
- Convenience : 16.4 ft. long power cord for easy maneuverability
- Includes : Hex wrench
SRD 39,105.75SRD 88,876.70MAKITA HM1810 BREAKER HAMMER
SRD 39,105.75SRD 88,876.70 -
MAKITA EK7301 14″73CC POWER CUTTER
- Five-stage, foam-paper-nylon system with advance
directional air flow provides cleaner air for better saw
performance - Improved ignition system with larger flywheel and rare
earth magnets create more efficient power - Cutting arm position changes simply from center position
to flush (outboard) position allowing cuts directly
adjacent to curb edges, wall or directly above the ground - On-Off-Choke operation switch on a single lever for
operator convenience - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort - Microchip-controlled carburetor designed to compensate
engine timing according to work load - Aluminum guard and wheel pressure plates to reduce weight
- Starter grip decompression valve for faster starting
SRD 36,916.00SRD 83,900.00MAKITA EK7301 14″73CC POWER CUTTER
SRD 36,916.00SRD 83,900.00 - Five-stage, foam-paper-nylon system with advance
-
MAKITA HM1213C DEMOLITION HAMMER;SDS-MAX
- Comfort : Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration
- Durability : L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
- Applications : Variable speed control dial enables user to match the speed to the application
- Accuracy : Soft start suppresses start-up reaction for more precision and better accuracy
- Includes : Bull point, bit grease and case
SRD 33,044.00SRD 75,100.00MAKITA HM1213C DEMOLITION HAMMER;SDS-MAX
SRD 33,044.00SRD 75,100.00 -
MAKITA HM1101C DEMOLITION HAMMER;SDS-MAX
- Soft start feature.
- Constant speed under load
- One-touch sliding chuck for easy bit changes.
- Double Insulation
- Includes carry case
SRD 28,512.00SRD 64,800.00MAKITA HM1101C DEMOLITION HAMMER;SDS-MAX
SRD 28,512.00SRD 64,800.00 -
MAKITA HR5212C ROTARY HAMMER 2″ 52MM SDS-MAX
- Has over 45% less vibration than the previous model.
- It is designed with improving anti-vibration technology. (AVT)
- A synchronized three-component system for significantly less vibration.
SRD 20,945.10SRD 47,602.50MAKITA HR5212C ROTARY HAMMER 2″ 52MM SDS-MAX
SRD 20,945.10SRD 47,602.50 -
SRD 19,865.78
SRD 45,149.50MAKITA TW1000 1″ IMPACT WRENCH W/FRICTION RING ANVIL
SRD 19,865.78SRD 45,149.50 -
SRD 19,401.62
SRD 44,094.60MAKITA HR4013C ROTARY HAMMER 1-9/16″(40MM)
SRD 19,401.62SRD 44,094.60 -
MAKITA 1100 POWER PLANER 82MM
This powerful 750W planer is designed for precision and efficiency in woodworking projects. It features a planing width of 82 mm (3-1/4″), allowing for broad coverage in each pass, while the planing depth of 3 mm (1/8″) provides the flexibility to remove substantial material or perform fine adjustments.
SRD 15,356.00SRD 34,900.00MAKITA 1100 POWER PLANER 82MM
SRD 15,356.00SRD 34,900.00 -
DEWALT DWS715 12-INCH MITER SAW, 15-AMP, SINGLE BEVEL, COMPOUND
The DW715 12-inch single bevel miter saw is powered by a 15 amp motor to drive 4,000 rpm for increased power and durability. Features stainless steel miter lock plate and cam miter lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding gates support 5-1/2 in.
SRD 15,000.00 -
MAKITA 1805N POWER PLANER 155MM
- Rugged aluminium housing and easy depth settings.
- Planes up to 155mm (6-1/8″) wide and 2mm (1/16″) deep in a single pass.
- Precision machined aluminium base for planing accuracy.
Item Includes- Sharpening Holder Assembly, Blade Gauge Assembly, Socket Wrench, Planer Blades 2.
SRD 12,750.98SRD 28,979.50MAKITA 1805N POWER PLANER 155MM
SRD 12,750.98SRD 28,979.50 -
MAKITA HR2810 COMBINATION HAMMER 1-1/8′(28MM);SDS-PLUS
- 3 operation modes: hammering, hammering with rotation, rotation
- Highest-in-class efficiency in both drilling and chipping
- Compact L-shaped motor housing
- One-touch sliding chuck for easy bit change.
- Ergonomically designed handle with rubberized soft grip provides more control and comfort
- Double insulation for extra durability
- Has variable speed
- Reversing combination hammer drill
- Adapted for SDS plus bits
- With torque limiter
- With dust collecting feature
SRD 11,572.00SRD 26,300.00MAKITA HR2810 COMBINATION HAMMER 1-1/8′(28MM);SDS-PLUS
SRD 11,572.00SRD 26,300.00