-
MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
- Automatic engine decompression valve is engineered
into the cam gear to reduce pull start force by 40% - Five-stage, foam-paper-nylon filtration system with
advance direction air flow to provide cleaner air for better
engine durability - Integrated wheels reduce fatigue during long straight cuts
and retract when not in use to prevent unexpected
movement - Clear primer bulb facilitates fuel delivery to the carburetor
for easier cold starts - Pressure compensated carburetor with vented choke
plate is engineered to reduce flooding by automatically
adjusting to deliver the proper amount of fuel - Advanced oil separation & lubrication system to improve
valve train durability and engine life - Specially treated rods, followers and valves minimize wear
and extend engine life - Single lever On-Off-Choke operation switch for operator
convenience - Shielded exhaust outlet and larger spark arrestor screen
prevents contaminates from restricting air flow - External fuel tank vent eliminates pressure build up
- Sealed cartridge recoil starter rope reduces wear by
keeping out dust and debris - Cutting arm easily changes from center position to flush
(outboard) position allowing cuts directly adjacent to curb
edges, wall or directly above the ground - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort
SRD 38,200.00SRD 95,500.00MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
SRD 38,200.00SRD 95,500.00 - Automatic engine decompression valve is engineered
-
MAKITA HM1810 BREAKER HAMMER
- Power : 15 AMP motor to tackle demanding jobs
- Comfort : Makita’s exclusive AVT® counterbalance system reduces vibration
- Durability : Automatic brush cut-out system for longer tool life
- Convenience : 16.4 ft. long power cord for easy maneuverability
- Includes : Hex wrench
SRD 35,550.68SRD 88,876.70MAKITA HM1810 BREAKER HAMMER
SRD 35,550.68SRD 88,876.70 -
MAKITA EK7301 14″73CC POWER CUTTER
- Five-stage, foam-paper-nylon system with advance
directional air flow provides cleaner air for better saw
performance - Improved ignition system with larger flywheel and rare
earth magnets create more efficient power - Cutting arm position changes simply from center position
to flush (outboard) position allowing cuts directly
adjacent to curb edges, wall or directly above the ground - On-Off-Choke operation switch on a single lever for
operator convenience - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort - Microchip-controlled carburetor designed to compensate
engine timing according to work load - Aluminum guard and wheel pressure plates to reduce weight
- Starter grip decompression valve for faster starting
SRD 33,560.00SRD 83,900.00MAKITA EK7301 14″73CC POWER CUTTER
SRD 33,560.00SRD 83,900.00 - Five-stage, foam-paper-nylon system with advance
-
MAKITA HM1213C DEMOLITION HAMMER;SDS-MAX
- Comfort : Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration
- Durability : L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
- Applications : Variable speed control dial enables user to match the speed to the application
- Accuracy : Soft start suppresses start-up reaction for more precision and better accuracy
- Includes : Bull point, bit grease and case
SRD 30,040.00SRD 75,100.00MAKITA HM1213C DEMOLITION HAMMER;SDS-MAX
SRD 30,040.00SRD 75,100.00 -
MAKITA HM1101C DEMOLITION HAMMER;SDS-MAX
- Soft start feature.
- Constant speed under load
- One-touch sliding chuck for easy bit changes.
- Double Insulation
- Includes carry case
SRD 25,920.00SRD 64,800.00MAKITA HM1101C DEMOLITION HAMMER;SDS-MAX
SRD 25,920.00SRD 64,800.00 -
SRD 18,059.80
SRD 45,149.50MAKITA TW1000 1″ IMPACT WRENCH W/FRICTION RING ANVIL
SRD 18,059.80SRD 45,149.50 -
DEWALT DWS715 12-INCH MITER SAW, 15-AMP, SINGLE BEVEL, COMPOUND
The DW715 12-inch single bevel miter saw is powered by a 15 amp motor to drive 4,000 rpm for increased power and durability. Features stainless steel miter lock plate and cam miter lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding gates support 5-1/2 in.
SRD 15,000.00 -
MAKITA BO6030 RANDOM ORBIT SANDER6″ (150MM)
- Variable speed control dial (4,000-10,000 OPM) enables user to match the sanding speed to the application
- Efficient through-the-pad dust collection system with dust bag for a cleaner work environment
- Ergonomic rubberized rear handle reduces vibration for operator comfort
- 1/8″ orbit diameter provides a swirl-free finish
- Utilizes 6″ hook-and-loop abrasive discs for fast and easy installation
SRD 9,000.00SRD 22,500.00MAKITA BO6030 RANDOM ORBIT SANDER6″ (150MM)
SRD 9,000.00SRD 22,500.00 -
MAKITA 1912B PLANER 4 3/8″ (110MM)
- Powerful 7.5 AMP motor for improved performance
- Two-blade cutter head with 16,000 RPM delivers smooth finish and fast stock removal
- Lock-on button for continuous operation
- V-groove on front shoe for easy chamfer cutting
- Precision machined aluminum base for planing accuracy
SRD 7,961.80SRD 19,904.50MAKITA 1912B PLANER 4 3/8″ (110MM)
SRD 7,961.80SRD 19,904.50 -
MAKITA EX2650LH BRUSH CUTTER SPLIT
- Performance : Powerful and fuel efficient 25.4 cc multi-position 4-stroke engine
- Durability : Heavy duty, dual stage air filter with large sealing areas and “Tool-less” filter access
- Versatility : Multi-position lubrication system enables continuous operation at any engine angle
- Efficiency : Quick release couple shaft attachment can be used with multiple attachments
- Includes : Tool kit
SRD 7,960.00SRD 19,900.00MAKITA EX2650LH BRUSH CUTTER SPLIT
SRD 7,960.00SRD 19,900.00 -
CHANNELLOCK 352503 8 GAL 4.0-PEAK HP STAINLESS STEEL WET/DRY VACUUM
Elevate your cleaning standards with the Channellock 8 Gal. 4.0-Peak HP Stainless Steel Wet/Dry Vacuum, a versatile powerhouse designed to tackle any mess with unparalleled efficiency. Constructed with a durable stainless steel tank, this vacuum excels in both wet and dry environments, offering a robust solution for your cleaning needs. The 4.0 peak HP motor ensures powerful suction, making quick work of debris, liquids, and everything in between.
SRD 5,909.09 -
MAKITA 199993-7 PSK BL 1830B,DC185SD+CARTON
DC185SD:
- The charger communicates with the individual cell in battery with a built in CPU and then it controls current, voltage, and temperature for both rapid and optimum charge
- Therefore the battery has longer life as it can be charged in the best method and duration
SRD 4,997.50SRD 9,995.00MAKITA 199993-7 PSK BL 1830B,DC185SD+CARTON
SRD 4,997.50SRD 9,995.00
Product categorie
