-
MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
- Automatic engine decompression valve is engineered
into the cam gear to reduce pull start force by 40% - Five-stage, foam-paper-nylon filtration system with
advance direction air flow to provide cleaner air for better
engine durability - Integrated wheels reduce fatigue during long straight cuts
and retract when not in use to prevent unexpected
movement - Clear primer bulb facilitates fuel delivery to the carburetor
for easier cold starts - Pressure compensated carburetor with vented choke
plate is engineered to reduce flooding by automatically
adjusting to deliver the proper amount of fuel - Advanced oil separation & lubrication system to improve
valve train durability and engine life - Specially treated rods, followers and valves minimize wear
and extend engine life - Single lever On-Off-Choke operation switch for operator
convenience - Shielded exhaust outlet and larger spark arrestor screen
prevents contaminates from restricting air flow - External fuel tank vent eliminates pressure build up
- Sealed cartridge recoil starter rope reduces wear by
keeping out dust and debris - Cutting arm easily changes from center position to flush
(outboard) position allowing cuts directly adjacent to curb
edges, wall or directly above the ground - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort
SRD 38,200.00SRD 95,500.00MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
SRD 38,200.00SRD 95,500.00 - Automatic engine decompression valve is engineered
-
MAKITA HM1810 BREAKER HAMMER
- Power : 15 AMP motor to tackle demanding jobs
- Comfort : Makita’s exclusive AVT® counterbalance system reduces vibration
- Durability : Automatic brush cut-out system for longer tool life
- Convenience : 16.4 ft. long power cord for easy maneuverability
- Includes : Hex wrench
SRD 35,550.68SRD 88,876.70MAKITA HM1810 BREAKER HAMMER
SRD 35,550.68SRD 88,876.70 -
MAKITA EK7301 14″73CC POWER CUTTER
- Five-stage, foam-paper-nylon system with advance
directional air flow provides cleaner air for better saw
performance - Improved ignition system with larger flywheel and rare
earth magnets create more efficient power - Cutting arm position changes simply from center position
to flush (outboard) position allowing cuts directly
adjacent to curb edges, wall or directly above the ground - On-Off-Choke operation switch on a single lever for
operator convenience - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort - Microchip-controlled carburetor designed to compensate
engine timing according to work load - Aluminum guard and wheel pressure plates to reduce weight
- Starter grip decompression valve for faster starting
SRD 33,560.00SRD 83,900.00MAKITA EK7301 14″73CC POWER CUTTER
SRD 33,560.00SRD 83,900.00 - Five-stage, foam-paper-nylon system with advance
-
MAKITA HM1213C DEMOLITION HAMMER;SDS-MAX
- Comfort : Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration
- Durability : L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
- Applications : Variable speed control dial enables user to match the speed to the application
- Accuracy : Soft start suppresses start-up reaction for more precision and better accuracy
- Includes : Bull point, bit grease and case
SRD 30,040.00SRD 75,100.00MAKITA HM1213C DEMOLITION HAMMER;SDS-MAX
SRD 30,040.00SRD 75,100.00 -
MAKITA HM1101C DEMOLITION HAMMER;SDS-MAX
- Soft start feature.
- Constant speed under load
- One-touch sliding chuck for easy bit changes.
- Double Insulation
- Includes carry case
SRD 25,920.00SRD 64,800.00MAKITA HM1101C DEMOLITION HAMMER;SDS-MAX
SRD 25,920.00SRD 64,800.00 -
SRD 18,059.80
SRD 45,149.50MAKITA TW1000 1″ IMPACT WRENCH W/FRICTION RING ANVIL
SRD 18,059.80SRD 45,149.50 -
MAKITA BO6030 RANDOM ORBIT SANDER6″ (150MM)
- Variable speed control dial (4,000-10,000 OPM) enables user to match the sanding speed to the application
- Efficient through-the-pad dust collection system with dust bag for a cleaner work environment
- Ergonomic rubberized rear handle reduces vibration for operator comfort
- 1/8″ orbit diameter provides a swirl-free finish
- Utilizes 6″ hook-and-loop abrasive discs for fast and easy installation
SRD 9,000.00SRD 22,500.00MAKITA BO6030 RANDOM ORBIT SANDER6″ (150MM)
SRD 9,000.00SRD 22,500.00 -
MAKITA 1912B PLANER 4 3/8″ (110MM)
- Powerful 7.5 AMP motor for improved performance
- Two-blade cutter head with 16,000 RPM delivers smooth finish and fast stock removal
- Lock-on button for continuous operation
- V-groove on front shoe for easy chamfer cutting
- Precision machined aluminum base for planing accuracy
SRD 7,961.80SRD 19,904.50MAKITA 1912B PLANER 4 3/8″ (110MM)
SRD 7,961.80SRD 19,904.50 -
MAKITA EX2650LH BRUSH CUTTER SPLIT
- Performance : Powerful and fuel efficient 25.4 cc multi-position 4-stroke engine
- Durability : Heavy duty, dual stage air filter with large sealing areas and “Tool-less” filter access
- Versatility : Multi-position lubrication system enables continuous operation at any engine angle
- Efficiency : Quick release couple shaft attachment can be used with multiple attachments
- Includes : Tool kit
SRD 7,960.00SRD 19,900.00MAKITA EX2650LH BRUSH CUTTER SPLIT
SRD 7,960.00SRD 19,900.00 -
CHANNELLOCK 352503 8 GAL 4.0-PEAK HP STAINLESS STEEL WET/DRY VACUUM
Elevate your cleaning standards with the Channellock 8 Gal. 4.0-Peak HP Stainless Steel Wet/Dry Vacuum, a versatile powerhouse designed to tackle any mess with unparalleled efficiency. Constructed with a durable stainless steel tank, this vacuum excels in both wet and dry environments, offering a robust solution for your cleaning needs. The 4.0 peak HP motor ensures powerful suction, making quick work of debris, liquids, and everything in between.
SRD 5,909.09 -
STANLEY DC INVERTER STICK WELDER POWER 110V – 80A
The Stanley Power 119 is a powerful, compact, and portable welder. Weighing only 3.6 kg, it operates on 120 volts and delivers up to 80 amps. It is suitable for 7018, 6011, and 6013 electrodes and comes with a professional Stanley carrying case. The DC inverter technology ensures longer duty cycles and smooth welds. It can weld mild steel and stainless steel up to 4 mm thick, with precise power control, and can be used with a generator. Turbo cooling and an automatic shut-off feature prevent overheating. This item is Ideal for home use, maintenance, repairs, workshops, and fieldwork, it also includes cables, an electrode holder, a clamp, a hammer/chisel, and a face shield
SRD 5,750.00STANLEY DC INVERTER STICK WELDER POWER 110V – 80A
SRD 5,750.00 -
MAKITA 199993-7 PSK BL 1830B,DC185SD+CARTON
DC185SD:
- The charger communicates with the individual cell in battery with a built in CPU and then it controls current, voltage, and temperature for both rapid and optimum charge
- Therefore the battery has longer life as it can be charged in the best method and duration
SRD 4,997.50SRD 9,995.00MAKITA 199993-7 PSK BL 1830B,DC185SD+CARTON
SRD 4,997.50SRD 9,995.00
Product categorie
