-
SRD 335.00
SRD 670.00MAKITA D-29935 1″ SELF FEED BIT
SRD 335.00SRD 670.00 -
MAKITA D-30025 2-1/4 SELF FEED BIT
Makita Self Feed Bit is designed for drilling holes through wood for pipe and conduit installation. Thethredaded screw point provides the self feed action and the outlining spurs create the diameter of the hole. The bit features a shank with three flats for reduced slippage under load.
SRD 1,500.00MAKITA D-30025 2-1/4 SELF FEED BIT
SRD 1,500.00 -
MAKITA D-41414 DIAMOND WHEEL DRY CUT
- Diamond Wheel Cutting for Metal
- For use with Cut Off Machine 14″
SRD 2,050.00SRD 4,100.00MAKITA D-41414 DIAMOND WHEEL DRY CUT
SRD 2,050.00SRD 4,100.00 -
MAKITA D-44292 MAKITA 9″ DIAMOND BLADE SEGMENTED CONCRETE
- This range of blades have been designed and manufactured to provide cost effective cutting in popular building materials.
- Materials – Concrete / Besser Block / Pavers / Cement / Roof Tile
SRD 262.50SRD 525.00MAKITA D-44292 MAKITA 9″ DIAMOND BLADE SEGMENTED CONCRETE
SRD 262.50SRD 525.00 -
MAKITA D-44373 4″ DIAMOND BLADE SEGMENTED CONCRETE
- This range of blades provide a high quality cutting performance especially in harder materials as the weld assists the blade to cope with the higher temperatures during the cutting action.
- Materials – Hard Concrete / Granite / Clay Brick / Concrete / Besser Block / Pavers / Cement / Roof Tile
SRD 370.00SRD 740.00MAKITA D-44373 4″ DIAMOND BLADE SEGMENTED CONCRETE
SRD 370.00SRD 740.00 -
MAKITA D-45652 NYLON WHEEL BRUSH 100MM/4″
- Suitable for removing rust and deburring particular areas
- Fine Grit (240#) is suitable for finishing surfaces
SRD 235.00SRD 470.00MAKITA D-45652 NYLON WHEEL BRUSH 100MM/4″
SRD 235.00SRD 470.00 -
MAKITA D-45989 7-1/4″X5/8 24T CARBIDE BLADE
The Makita® 7-1/4″ Framing Blade (D-45989) is ideal for use in most general construction cutting applications. It quickly cuts through rough framing lumber, plywood, OSB, and engineered lumber. The ATAF (Alternate Top Alternate Face) tooth design and expertly tensioned plate make for precise cuts. Ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss.
SRD 45.00SRD 90.00MAKITA D-45989 7-1/4″X5/8 24T CARBIDE BLADE
SRD 45.00SRD 90.00 -
MAKITA D-55326 WIRE BRUSH KNOT CUP 4″
Thick, Knotted CUP design is ideal for heavy-duty, aggressive surface conditioning on expansive surface areas while Thick, Knotted WHEEL design is best for restricted surface areas, small spaces and borders like pipes | Thinner, Crimped CUP design delivers maximal flexibility and fatigue resistance while also minimizing scratch risk in expansive metal surface areas
SRD 390.00MAKITA D-55326 WIRE BRUSH KNOT CUP 4″
SRD 390.00 -
MAKITA EK7301 14″73CC POWER CUTTER
- Five-stage, foam-paper-nylon system with advance
directional air flow provides cleaner air for better saw
performance - Improved ignition system with larger flywheel and rare
earth magnets create more efficient power - Cutting arm position changes simply from center position
to flush (outboard) position allowing cuts directly
adjacent to curb edges, wall or directly above the ground - On-Off-Choke operation switch on a single lever for
operator convenience - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort - Microchip-controlled carburetor designed to compensate
engine timing according to work load - Aluminum guard and wheel pressure plates to reduce weight
- Starter grip decompression valve for faster starting
SRD 33,560.00SRD 83,900.00MAKITA EK7301 14″73CC POWER CUTTER
SRD 33,560.00SRD 83,900.00 - Five-stage, foam-paper-nylon system with advance
-
MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
- Automatic engine decompression valve is engineered
into the cam gear to reduce pull start force by 40% - Five-stage, foam-paper-nylon filtration system with
advance direction air flow to provide cleaner air for better
engine durability - Integrated wheels reduce fatigue during long straight cuts
and retract when not in use to prevent unexpected
movement - Clear primer bulb facilitates fuel delivery to the carburetor
for easier cold starts - Pressure compensated carburetor with vented choke
plate is engineered to reduce flooding by automatically
adjusting to deliver the proper amount of fuel - Advanced oil separation & lubrication system to improve
valve train durability and engine life - Specially treated rods, followers and valves minimize wear
and extend engine life - Single lever On-Off-Choke operation switch for operator
convenience - Shielded exhaust outlet and larger spark arrestor screen
prevents contaminates from restricting air flow - External fuel tank vent eliminates pressure build up
- Sealed cartridge recoil starter rope reduces wear by
keeping out dust and debris - Cutting arm easily changes from center position to flush
(outboard) position allowing cuts directly adjacent to curb
edges, wall or directly above the ground - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort
SRD 38,200.00SRD 95,500.00MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
SRD 38,200.00SRD 95,500.00 - Automatic engine decompression valve is engineered
-
MAKITA EX2650LH BRUSH CUTTER SPLIT
- Performance : Powerful and fuel efficient 25.4 cc multi-position 4-stroke engine
- Durability : Heavy duty, dual stage air filter with large sealing areas and “Tool-less” filter access
- Versatility : Multi-position lubrication system enables continuous operation at any engine angle
- Efficiency : Quick release couple shaft attachment can be used with multiple attachments
- Includes : Tool kit
SRD 7,960.00SRD 19,900.00MAKITA EX2650LH BRUSH CUTTER SPLIT
SRD 7,960.00SRD 19,900.00 -
MAKITA FS2700 SCREWDRIVER
- 6 stage torque adjustment for a wide range of applications
- One touch locator
- Compact design for easy handling and manoeuvrability
- Best possible tool body for screwdriving:
- Minimise hand fatigue and pain even in long continuous operation
SRD 4,720.00SRD 11,800.00MAKITA FS2700 SCREWDRIVER
SRD 4,720.00SRD 11,800.00
Product categorie
