-
MAKITA D-21010 CUT OFF WHEEL 180 X 3 X 22.2 MM
- A30S-BF brown fused aluminum grit suitable for use with ferrous metals
- Available in type 1 flat and type 27 depressed center styles
- Ideal for General Purpose Cutting Applications
- Ideal for use by welders, metal fabricators, on-site installers, DIY and more!
- Tool must be properly guarded at all times
SRD 57.50SRD 115.00MAKITA D-21010 CUT OFF WHEEL 180 X 3 X 22.2 MM
SRD 57.50SRD 115.00 -
MAKITA D-23400 AUGER BITS 15/16X8
The bit installs quickly and easily for added user convenience. a spiral-shaped bit with a threaded tip at the front and Ttwo chisels at each tip’s end.
SRD 267.50SRD 535.00MAKITA D-23400 AUGER BITS 15/16X8
SRD 267.50SRD 535.00 -
MAKITA D-23662 AUGER BITS 9/16″X18″
A European manufactured hammer drill with a patented, high-volume, multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials.
SRD 322.50SRD 645.00MAKITA D-23662 AUGER BITS 9/16″X18″
SRD 322.50SRD 645.00 -
MAKITA D-24016 1″X6″ FLAT BIT HEX
this is designed to drill most types of wood, hard and soft wood.This set would be used by both trade professionals and home DIY users.
SRD 50.00SRD 100.00MAKITA D-24016 1″X6″ FLAT BIT HEX
SRD 50.00SRD 100.00 -
MAKITA D-24022 1-1/4″X6″ FLAT BIT HEX
- Chisel edge for heavy-duty, fast drilling
- For Rapid Boring Applications in Wood
- Brad point tip ensures precise and accurate holes
- Not for use in Drill Presses
SRD 67.50SRD 135.00MAKITA D-24022 1-1/4″X6″ FLAT BIT HEX
SRD 67.50SRD 135.00 -
SRD 335.00
SRD 670.00MAKITA D-29935 1″ SELF FEED BIT
SRD 335.00SRD 670.00 -
MAKITA D-30025 2-1/4 SELF FEED BIT
Makita Self Feed Bit is designed for drilling holes through wood for pipe and conduit installation. Thethredaded screw point provides the self feed action and the outlining spurs create the diameter of the hole. The bit features a shank with three flats for reduced slippage under load.
SRD 1,500.00MAKITA D-30025 2-1/4 SELF FEED BIT
SRD 1,500.00 -
MAKITA D-41414 DIAMOND WHEEL DRY CUT
- Diamond Wheel Cutting for Metal
- For use with Cut Off Machine 14″
SRD 2,050.00SRD 4,100.00MAKITA D-41414 DIAMOND WHEEL DRY CUT
SRD 2,050.00SRD 4,100.00 -
MAKITA D-44292 MAKITA 9″ DIAMOND BLADE SEGMENTED CONCRETE
- This range of blades have been designed and manufactured to provide cost effective cutting in popular building materials.
- Materials – Concrete / Besser Block / Pavers / Cement / Roof Tile
SRD 262.50SRD 525.00MAKITA D-44292 MAKITA 9″ DIAMOND BLADE SEGMENTED CONCRETE
SRD 262.50SRD 525.00 -
MAKITA D-44373 4″ DIAMOND BLADE SEGMENTED CONCRETE
- This range of blades provide a high quality cutting performance especially in harder materials as the weld assists the blade to cope with the higher temperatures during the cutting action.
- Materials – Hard Concrete / Granite / Clay Brick / Concrete / Besser Block / Pavers / Cement / Roof Tile
SRD 370.00SRD 740.00MAKITA D-44373 4″ DIAMOND BLADE SEGMENTED CONCRETE
SRD 370.00SRD 740.00 -
MAKITA D-45652 NYLON WHEEL BRUSH 100MM/4″
- Suitable for removing rust and deburring particular areas
- Fine Grit (240#) is suitable for finishing surfaces
SRD 235.00SRD 470.00MAKITA D-45652 NYLON WHEEL BRUSH 100MM/4″
SRD 235.00SRD 470.00 -
MAKITA D-45989 7-1/4″X5/8 24T CARBIDE BLADE
The Makita® 7-1/4″ Framing Blade (D-45989) is ideal for use in most general construction cutting applications. It quickly cuts through rough framing lumber, plywood, OSB, and engineered lumber. The ATAF (Alternate Top Alternate Face) tooth design and expertly tensioned plate make for precise cuts. Ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss.
SRD 45.00SRD 90.00MAKITA D-45989 7-1/4″X5/8 24T CARBIDE BLADE
SRD 45.00SRD 90.00
Product categorie
