-
MAKITA D-23662 AUGER BITS 9/16″X18″
A European manufactured hammer drill with a patented, high-volume, multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials.
SRD 322.50SRD 645.00MAKITA D-23662 AUGER BITS 9/16″X18″
SRD 322.50SRD 645.00 -
MAKITA D-24016 1″X6″ FLAT BIT HEX
this is designed to drill most types of wood, hard and soft wood.This set would be used by both trade professionals and home DIY users.
SRD 50.00SRD 100.00MAKITA D-24016 1″X6″ FLAT BIT HEX
SRD 50.00SRD 100.00 -
MAKITA D-24022 1-1/4″X6″ FLAT BIT HEX
- Chisel edge for heavy-duty, fast drilling
- For Rapid Boring Applications in Wood
- Brad point tip ensures precise and accurate holes
- Not for use in Drill Presses
SRD 67.50SRD 135.00MAKITA D-24022 1-1/4″X6″ FLAT BIT HEX
SRD 67.50SRD 135.00 -
SRD 335.00
SRD 670.00MAKITA D-29935 1″ SELF FEED BIT
SRD 335.00SRD 670.00 -
MAKITA D-30025 2-1/4 SELF FEED BIT
Makita Self Feed Bit is designed for drilling holes through wood for pipe and conduit installation. Thethredaded screw point provides the self feed action and the outlining spurs create the diameter of the hole. The bit features a shank with three flats for reduced slippage under load.
SRD 1,500.00MAKITA D-30025 2-1/4 SELF FEED BIT
SRD 1,500.00 -
MAKITA D-41414 DIAMOND WHEEL DRY CUT
- Diamond Wheel Cutting for Metal
- For use with Cut Off Machine 14″
SRD 2,050.00SRD 4,100.00MAKITA D-41414 DIAMOND WHEEL DRY CUT
SRD 2,050.00SRD 4,100.00 -
MAKITA D-44292 MAKITA 9″ DIAMOND BLADE SEGMENTED CONCRETE
- This range of blades have been designed and manufactured to provide cost effective cutting in popular building materials.
- Materials – Concrete / Besser Block / Pavers / Cement / Roof Tile
SRD 262.50SRD 525.00MAKITA D-44292 MAKITA 9″ DIAMOND BLADE SEGMENTED CONCRETE
SRD 262.50SRD 525.00 -
MAKITA D-44373 4″ DIAMOND BLADE SEGMENTED CONCRETE
- This range of blades provide a high quality cutting performance especially in harder materials as the weld assists the blade to cope with the higher temperatures during the cutting action.
- Materials – Hard Concrete / Granite / Clay Brick / Concrete / Besser Block / Pavers / Cement / Roof Tile
SRD 370.00SRD 740.00MAKITA D-44373 4″ DIAMOND BLADE SEGMENTED CONCRETE
SRD 370.00SRD 740.00 -
MAKITA D-45652 NYLON WHEEL BRUSH 100MM/4″
- Suitable for removing rust and deburring particular areas
- Fine Grit (240#) is suitable for finishing surfaces
SRD 235.00SRD 470.00MAKITA D-45652 NYLON WHEEL BRUSH 100MM/4″
SRD 235.00SRD 470.00 -
MAKITA D-45989 7-1/4″X5/8 24T CARBIDE BLADE
The Makita® 7-1/4″ Framing Blade (D-45989) is ideal for use in most general construction cutting applications. It quickly cuts through rough framing lumber, plywood, OSB, and engineered lumber. The ATAF (Alternate Top Alternate Face) tooth design and expertly tensioned plate make for precise cuts. Ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss.
SRD 45.00SRD 90.00MAKITA D-45989 7-1/4″X5/8 24T CARBIDE BLADE
SRD 45.00SRD 90.00 -
MAKITA D-55326 WIRE BRUSH KNOT CUP 4″
Thick, Knotted CUP design is ideal for heavy-duty, aggressive surface conditioning on expansive surface areas while Thick, Knotted WHEEL design is best for restricted surface areas, small spaces and borders like pipes | Thinner, Crimped CUP design delivers maximal flexibility and fatigue resistance while also minimizing scratch risk in expansive metal surface areas
SRD 390.00MAKITA D-55326 WIRE BRUSH KNOT CUP 4″
SRD 390.00 -
MAKITA EK7301 14″73CC POWER CUTTER
- Five-stage, foam-paper-nylon system with advance
directional air flow provides cleaner air for better saw
performance - Improved ignition system with larger flywheel and rare
earth magnets create more efficient power - Cutting arm position changes simply from center position
to flush (outboard) position allowing cuts directly
adjacent to curb edges, wall or directly above the ground - On-Off-Choke operation switch on a single lever for
operator convenience - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort - Microchip-controlled carburetor designed to compensate
engine timing according to work load - Aluminum guard and wheel pressure plates to reduce weight
- Starter grip decompression valve for faster starting
SRD 33,560.00SRD 83,900.00MAKITA EK7301 14″73CC POWER CUTTER
SRD 33,560.00SRD 83,900.00 - Five-stage, foam-paper-nylon system with advance
Product categorie
