-
MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
- Automatic engine decompression valve is engineered
into the cam gear to reduce pull start force by 40% - Five-stage, foam-paper-nylon filtration system with
advance direction air flow to provide cleaner air for better
engine durability - Integrated wheels reduce fatigue during long straight cuts
and retract when not in use to prevent unexpected
movement - Clear primer bulb facilitates fuel delivery to the carburetor
for easier cold starts - Pressure compensated carburetor with vented choke
plate is engineered to reduce flooding by automatically
adjusting to deliver the proper amount of fuel - Advanced oil separation & lubrication system to improve
valve train durability and engine life - Specially treated rods, followers and valves minimize wear
and extend engine life - Single lever On-Off-Choke operation switch for operator
convenience - Shielded exhaust outlet and larger spark arrestor screen
prevents contaminates from restricting air flow - External fuel tank vent eliminates pressure build up
- Sealed cartridge recoil starter rope reduces wear by
keeping out dust and debris - Cutting arm easily changes from center position to flush
(outboard) position allowing cuts directly adjacent to curb
edges, wall or directly above the ground - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort
SRD 38,200.00SRD 95,500.00MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
SRD 38,200.00SRD 95,500.00 - Automatic engine decompression valve is engineered
-
MAKITA EX2650LH BRUSH CUTTER SPLIT
- Performance : Powerful and fuel efficient 25.4 cc multi-position 4-stroke engine
- Durability : Heavy duty, dual stage air filter with large sealing areas and “Tool-less” filter access
- Versatility : Multi-position lubrication system enables continuous operation at any engine angle
- Efficiency : Quick release couple shaft attachment can be used with multiple attachments
- Includes : Tool kit
SRD 7,960.00SRD 19,900.00MAKITA EX2650LH BRUSH CUTTER SPLIT
SRD 7,960.00SRD 19,900.00 -
MAKITA FS2700 SCREWDRIVER
- 6 stage torque adjustment for a wide range of applications
- One touch locator
- Compact design for easy handling and manoeuvrability
- Best possible tool body for screwdriving:
- Minimise hand fatigue and pain even in long continuous operation
SRD 4,720.00SRD 11,800.00MAKITA FS2700 SCREWDRIVER
SRD 4,720.00SRD 11,800.00 -
MAKITA FS4000 DRYWALL SCREWDRIVER
- Makita 1/4-Inch Variable Speed Drywall Screwdriver
- Powerful genuine Makita 6 Amp Motor
- Lightweight at only 2.9 Pounds
- Features a long cord (8.2 feet)
- Rubber inlay ergonomic grip for excellent control
SRD 2,394.00SRD 5,985.00MAKITA FS4000 DRYWALL SCREWDRIVER
SRD 2,394.00SRD 5,985.00 -
MAKITA HG6020 HEAT GUN
- Professional tool with high-spec features for any hot air application
- Large setting wheel for adjusting temperature
- Blower controlled by 3-speed operating switch
- Cool air stage for rapid cooling on nozzle changing
- Ergonomic soft grip handle
- Dual air vents
SRD 2,880.00SRD 7,200.00MAKITA HG6020 HEAT GUN
SRD 2,880.00SRD 7,200.00 -
MAKITA HM1101C DEMOLITION HAMMER;SDS-MAX
- Soft start feature.
- Constant speed under load
- One-touch sliding chuck for easy bit changes.
- Double Insulation
- Includes carry case
SRD 25,920.00SRD 64,800.00MAKITA HM1101C DEMOLITION HAMMER;SDS-MAX
SRD 25,920.00SRD 64,800.00 -
MAKITA HM1213C DEMOLITION HAMMER;SDS-MAX
- Comfort : Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration
- Durability : L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
- Applications : Variable speed control dial enables user to match the speed to the application
- Accuracy : Soft start suppresses start-up reaction for more precision and better accuracy
- Includes : Bull point, bit grease and case
SRD 30,040.00SRD 75,100.00MAKITA HM1213C DEMOLITION HAMMER;SDS-MAX
SRD 30,040.00SRD 75,100.00 -
MAKITA HM1810 BREAKER HAMMER
- Power : 15 AMP motor to tackle demanding jobs
- Comfort : Makita’s exclusive AVT® counterbalance system reduces vibration
- Durability : Automatic brush cut-out system for longer tool life
- Convenience : 16.4 ft. long power cord for easy maneuverability
- Includes : Hex wrench
SRD 35,550.68SRD 88,876.70MAKITA HM1810 BREAKER HAMMER
SRD 35,550.68SRD 88,876.70 -
MAKITA KP0800-240 POWER PLANER
- Right Chip Ejection
- Parallel Fence
- Lock-Off Switch
- Dust Extraction Facility
- Fan-Cooled Motor
- Replaceable Carbon Brushes
- Soft-Grip Handle
SRD 4,840.00SRD 12,100.00MAKITA KP0800-240 POWER PLANER
SRD 4,840.00SRD 12,100.00 -
MAKITA KP0800K PLANER 3-1/4″ (82MM)
- 6.5 AMP motor delivers more output power for increased stock removal and superior finishes
- Planes up to 3-1/4″ wide and 3/32″ deep in a single pass
- Two-blade cutter head with 17,000 RPM delivers smooth finish and fast stock removal
- Spring-loaded stand elevates the base to protect the blades and workpiece
- Easy blade setting system for fast blade installation
SRD 3,828.00SRD 9,570.00MAKITA KP0800K PLANER 3-1/4″ (82MM)
SRD 3,828.00SRD 9,570.00 -
MAKITA M0600G MT 10 MM DRILL
- High performance and durability at a low cost.
- Variable speed trigger allows operator to adjust speed based on material or application.
- Powerful 350 W motor for continuous use.
- Positive-grip in-line design maximizes thrust.
- Compact and lightweight for reduced operator fatigue.
SRD 960.00SRD 2,400.00MAKITA M0600G MT 10 MM DRILL
SRD 960.00SRD 2,400.00 -
MAKITA M6501G DRILL HIGH SPEED
- With depth gauge for uniform hole depth
- With 4,500 rpm high speed rotation, ideal for fast drilling of small holes
- Compact body weighs only for superior handling
SRD 1,240.00SRD 3,100.00MAKITA M6501G DRILL HIGH SPEED
SRD 1,240.00SRD 3,100.00
Product categorie
